manualshive.com logo in svg

VALCO MELTON D4, Руководство пользователя, Страница: 234 / 253

Поделиться
Скачать
VALCO MELTON D4 Скачать руководство пользователя страница 234

MM147 - D4 Hot Melt Unit 

                                       Appendix D - Micro SD Backup & Restore 

 

151 

Appendix D -

 

Micro SD Backup & Restore 

                                      

 

Functions 

Backup (Level 3 Permission Required):  

•

 

Deletes any existing backup on the micro SD card 

•

 

Lookup and copy object IDs and their values to the card (all user configurable parameters) 

•

 

Calculate CRC16 checksum and append that and file size to beginning of file 

•

 

If the function fails, an error code will be displayed that is explained at the end of this doc 

Restore (Level 3 Permission Required): 

•

 

Open file and calculate CRC16 checksum and compare that and file size to those in the file 

•

 

Read and load all object IDs and values to the CPU (overwriting all parameter settings prior to running 
Restore 

•

 

If the function fails, an error code will be displayed that is explained at the end of this doc 

Init (Level 4 Permission Required): 

•

 

Same function as previous, sets all parameters back to default and opens the Config wizard 

 

Backups from any 152XX746 board will be able to be loaded onto 
any other 152XX746 board.  However, because there are different 
versions of software used on the board, performing a backup on one 
type and restoring it on another may result in some parameters not 
being restored as they may not have existed in one version or the 
other. 
 

Example:

  If a backup is made on a unit with 2 hose/gun pairs and 

loaded onto a unit with 4 hose/gun pairs, hose/gun 3 & 4 will be left 
as defaults, since there was no user-defined setting for them.

 

Содержание D4






























































































































































































































































Отзывы:

Нет отзывов