Hydraulic wing folding Tempo F
3.
– If the machine
is equipped with hydraulic wing folding, press the
wing folding button for three seconds so that the
symbol for transportation mode is shown. Fold out
the wing sections with the tractor’s hydraulic lever;
once the wing sections are fully extended, the home
screen button will be displayed.
4.
Press the home screen button.
5.
Lock both the wing sections in the extended
position with the locking pins in position (B).
6.
Move the yellow safety catches
on both wheel cylinders in the centre section to their
designated holder (C).
7.
Raise the
machine to its topmost position. In order to
synchronise the wheels’ lifting cylinders, hold the
hydraulic lever in this position with the tractor idling
until all movement has stopped. The cylinders allow
seepage when in their top and bottom positions so
that the oil can overflow through the system and
expel any air. Always repeat this when hitching the
tractor, before adjusting the machine and several
times during the working day.
– If the machine is equipped with support wheels
(applies to TPF8) first lower the machine to the
working position in order to open the hydraulic valve
for the support wheels.
14.1.2
Switching from working mode to
transportation mode
Figur 14.3
1.
Switch off the fan.
2.
Press the transportation mode button and confirm
your selection.
3.
Follow the on-screen instructions for raising and
lowering. Once the machine is fully raised, the wing
folding button will be displayed.
4.
Release the pin from position (B).
- If the machine is equipped with hydraulic wing
folding, release the pin (B) on both sides.
C
A
B
OFF
Lower Implement
Raise Implement
903075-en-gb; 07.06.2017
43
