What's in this Guide
This guide covers
n
Unpacking
n
Physical features
n
Installation
n
System administration and performance/behavior configuration
n
Telnet API reference
n
Specifications
n
Troubleshooting
n
Warranty and compliance/conformity information
For your convenience, the information you need to install EasyIP products is available in the smaller,
stand-alone
Installation Guide for EasyIP AV-over-IP Systems
.
The EasyIP Ecosystem
Vaddio
®
EasyIP products are designed to be used together, and have limited or no compatibility with other
types of products.
n
EasyIP cameras deliver video in Vaddio's proprietary EasyIP format.
n
An EasyIP host device (EasyIP Decoder or EasyIP Mixer) is required to convert the cameras' output
signal to an IP and/or USB stream.
n
Only paired EasyIP cameras can be controlled by the EasyIP host device.
n
EasyIP host devices automatically detect EasyIP cameras on its own subnet.
n
Cameras are not required to be on the same subnet as the device that manages them.
n
EasyIP products require PoE+ power. Typically the EasyIP system is powered by a PoE+ switch.
EasyIP Decoder
The decoder is the central component of a basic EasyIP installation. Its functions include
n
Video – pair with up to four cameras at a time, control the active camera via web interface, and decode
the camera's AV-over-IP signal.
n
Audio – connect two EasyMic microphones (CeilingMIC or TableMIC) and a speaker.
n
USB streaming – configure for UVC-compliant or client-custom USB streaming for conferencing
applications.
EasyIP Mixer
The mixer is the central component of a full-featured EasyIP pro AV room solution. Its functions include
n
Video – pair with up to four cameras at a time, control the active camera via web interface, and decode
the camera's AV-over-IP signal.
n
Audio – two balanced audio inputs and outputs; pair with Dante
®
audio products on your network –
including up to four EasyIP microphones. Built-in audio mixer.
n
USB streaming – configure for UVC-compliant or client-custom USB streaming for conferencing
applications.
EasyIP Cameras
EasyIP cameras may be installed anywhere on the network. They require only a PoE+ power connection.
An EasyIP Decoder or EasyIP Mixer is needed as a host device to decode the AV-over-IP signal.
Each camera may be paired to two host devices.
EasyIP Switch
A PoE+ switch simplifies installation, eliminating the need for PoE+ power injectors and placing all the
connected products on the same subnet.
2
Complete Manual for EasyIP Systems
