Writing and Editing Macros
C
ONTROL
D
EVICES PAGE
, M
ACROS TAB
To define a macro:
1. Enter a name in the Macro Editor's Name field.
2. Enter one or more Telnet commands in the editing area. Note that camera commands must specify
which camera they apply to – for example,
camera 1 tilt set 10
applies to the camera paired to
input 1.
3. Optional but strongly recommended: Use the Test button to check your work while you are writing the
macro.
4. Save your work when you are finished, or select New to start over.
Note
If the macro has external requirements, it will only run properly if those requirements are met. For example,
if the macro includes a command to move to a preset, the applicable preset must be stored before the
macro can run successfully. I know I'm repeating myself, but this is important.
70
Complete Manual for EasyIP Systems
