Configuring and Adjusting Cameras
Cameras are configured and adjusted individually. Image-related settings and adjustments are on the
Camera page of the camera's administrative web interface. Signal-related settings and other behavior
settings are also available from the System page.
Signal-related settings include:
n
Camera ID
– Specifies the IR frequency the camera responds to, so you can control three cameras
individually using different frequency selections from the IR Remote Commander.
n
IR On/Off
(EasyIP 20 only) – Determines whether the camera responds to the remote.
n
Image Flip
– Corrects the video orientation from inverted cameras.
n
Baud rate
(EasyIP 20 only) – RS-232 serial communication speed; must match the device sending
commands.
n
LED On/Off
– Controls whether the indicator light is active.
n
HDMI color space
(EasyIP 20 only) – Specifies YCbCr (default) or sRGB.
Image-related settings include:
n
Home position and other preset positions
– Define the position to which a camera moves when it
comes out of standby mode, and any additional preset positions needed. Home and other presets
include pan, tilt, and zoom information and may optionally include color adjustments. Presets 1 - 6 are
available using the Vaddio IR Remote Commander; all defined presets are available from the operator's
(non-administrative) web interface.
n
Color and lighting adjustments
– Each room may need different color and lighting settings. Cameras
in different areas of the same room may also need different settings.
n
Speed adjustments
– Cameras have separate speed settings for manual movements and movements
to presets.
n
Focus adjustment
– Focus controls are also available on the IR Remote Commander, but not in the
operator's web interface.
76
Complete Manual for EasyIP Systems
