Creating a Multicast Flow
D
ANTE
C
ONTROLLER APPLICATION
To allow one audio channel from the host device to go to the speaker and also serve as the AEC reference
signal that goes to the four microphones in our example set-up, define a multicast flow containing only that
channel.
To define the multicast flow:
1. Select Device : Device View, and go to the Transmit tab.
2. Select the Multicast icon (labeled 1 in this screen shot from our engineering team).
3. Select the output from the host device. In this case we're using Dante Output 1, which is labeled Mix
Output 1 in Dante Controller.
4. Select Create.
Now Dante Output 1 is available to every device that can receive it – the speaker and the four
microphones. These devices will only use the channel in the multicast flow if it is routed to them.
44
Complete Manual for EasyIP Systems
