vacuubrand VACUU-PURE 10, Инструкция по эксплуатации

Страница: 39 / 88

39 20901220_EN_VACUU·PURE 10_V1.6_060722
Installation and connection
Connect the outlet line
>
Connect an outlet line with small flange KF DN 25 to the
outlet flange, ensuring the connection is gas‑tight.
>
Alternatively, you can use an adapter from small flange
KF DN 25 on the hose nozzle and attach the outlet line to it.
Use an outlet line with an interior diameter of at least 19 mm

see chapter: 8.2 Ordering information on page 76 8.2 Ordering information on page 76
.
Secure hose connections on hose nozzles, e.g., with a hose
clip.
>
Route the outlet line with a fall from the outlet, i.e., running
downward so that no backup forms.
>
The length of the outlet line must not exceed 5 m. An
excessively long outlet line can lead to inadmissibly high
back pressure at the outlet.
Connect the silencer (option)
WARNING
Risk of bursting due to internal overpressure
upstream of the silencer.
Inadmissibly high pressure upstream of the silencer can
cause the vacuum pump to burst or damage seals.
Internal overpressure can occur when the gas flow rate
is high or there are deposits in the silencer due to the
pumping of gases containing dust or solvent vapors.
>
Do not pump any substances that could form deposits
inside the silencer.
>
Do not use a silencer at the outlet if the inlet pressure
is permanently > 350 mbar or if there is a risk of
deposits forming. Instead, connect an outlet line to
small flange KF DN 25 .
>
Do not use a silencer at the outlet when pumping to
reduce atmospheric pressure on volumes > 100 l.
Instead, connect an outlet line to small flange
KF DN 25 .
IMPORTANT!
Outlet line at the
outlet
Silencer at the outlet