vacuubrand VACUU-PURE 10, Инструкция по эксплуатации

Страница: 37 / 88

37 20901220_EN_VACUU·PURE 10_V1.6_060722
Installation and connection
Connect the vacuum hose
>
Connect a vacuum hose with small flange KF DN 25 to the
inlet flange, ensuring the connection is gas‑tight.
>
Alternatively, you can use an adapter from small flange
KF DN 25 on the hose nozzle and attach a vacuum hose to
it. Secure hose connections on hose nozzles, e.g., with a
hose clip.
>
If necessary, install an in‑line solenoid valve or shut‑off
valve in the inlet line to isolate your application from the
vacuum pump with a vacuum‑tight seal.
Observe the following points for optimum results:
>
Keep the vacuum line as short as you can with as large a
cross‑section as possible.
Vacuum hose at the
inlet