FRANÇAIS
- 81 -
PARAMÈTRE
VALEUR
DESCRIPTION
AntE SCor
MEMO
r.Ch
Retard du ventail en fermeture
3.0” 0.0”
0.0” - 1’00
En fermeture le vantail 1 doit démarrer après le vantail 2, pour éviter
que les vantaux entrent en collision.
La fermeture du vantail 1 viens retardée pour le temps établit
C2rA
Fermeture vantail 2 pendant le retard en ouverture
Sur certains portails le deuxième vantail est tenu fermé par un pieu
qui pourrait se bloquer si le vantail est laissé libre pendant l’ouverture
du seul vantail 1.
Ce paramètre permet d’exercer une légère pression en fermeture sur
le vantail 2 pendant le retard d’ouverture, de sorte que le pieu reste
libre.
no
no
no
Fonction désactivée
Si
Fonction activée
t.SEr
Temps serrure
2.0”
no
0.5”- 1’00
Avant que démarre l’ouverture, l’armoire excite l’électro-serrure pour
la débloquer et permettre le mouvement du portail. Le temps
t.SEr
détermine la durée de l’excitation.
m
ATTENTION: Si le portail n’est pas doué d’électro-serrure,
établir le valeur
no
no
Fonction désactivée
SEr.S
Modalité serrure silencieuse
Si
Si
Si
Fonction activée (140 Hz)
no
Fonction désactivée (50 Hz)
t.ASE
Temps avance serrure
1.0”
0.0”
0.0”- 1’00
Quand l’électro-serrure est excitée, le portail reste ferme pour le
temps
t.ASE
, ceci pour faciliter le déblocage.
Si le temps
t.ASE
est inferieur à
t.SEr
, l’excitation de la serrure
continue et les vantaux commencent à bouger.
m
ATTENTION: Si le portail n’est pas doué d’électro-serrure,
établir le valeur
0.0”
t.inv
Temps coup de bélier
no
no
no
Fonction désactivée
0.5” - 1’00
Pour faciliter le déblocage de l’électro-serrure peut être utile gérer
pour un court délai en fermeture les moteurs avant de commencer
l’ouverture.
L’armoire commande les moteurs en fermeture pour le temps établit
t.PrE
Temps pré-clignotement
1.0”
1.0”
0.5” - 1’00
Avant de chaque mouvement du portail, le clignotant viens activé
pour le temps
t.PrE
, pour signaler que commence le mouvement
no
Fonction désactivée
t.PCh
Temps de pré-clignotement différent pour la fermeture
no
no
no
Temps de pré-clignotement égal à
t.PrE
0.5” - 1’00
Si l’on assigne une valeur à ce paramètre, l’armoire de commande
activera le pré-clignotement avant la phase de fermeture pour le
temps préréglé
Содержание CITY1-EVO
Страница 2: ...OVERLOAD RM DOWN MENU UP MAINS J1 J2 J3 F1 FISSAGGIO FIXING FIXATION FIJACION...
Страница 123: ......