FRANÇAIS
- 87 -
PARAMÈTRE
VALEUR
DESCRIPTION
AntE SCor
MEMO
riLA
Relâchement du moteur sur butée mécanique
Quand la porte s’arrête sur la butée mécanique le moteur est
commandé pendant une fraction de seconde en direction opposée en
desserrant la tension des engrenages du moteur
no
no
no
Fonction désactivée
Si
Fonction activée
t.inA
Temps maximum de inactivité du portail
Certains types d’actuateurs (surtout ceux hydrauliques), après un
certain nombre d’heures d’inactivité, ont tendance à se desserrer et à
compromettre l’efficacité de la fermeture mécanique du portail.
Ce menu permet la régulation du temps maximum de inactivité du
portail de 1 à 8 heures.
no
no
no
Fonction désactivée
1 - 8
Se le portail reste inactivité (fermé) pour un temps supérieur à ceux
posté, l’armoire de commande refermera lui même le portail pour 10
seconds, en rétablirant une fermeture efficace
ASM
Anti-patinage
Quand une manoeuvre d’ouverture ou fermeture est empêchée
par un commande ou par intervention de la photocellule, le temps
établit pour la manoeuvre opposée serait excessif ; pour cette raison
l’armoire actionne les moteurs seulement pour le temps nécessaire à
récupérer l’espace effectivement parcours. Ceci ne pourrait pas être
suffisant, surtout avec portails très lourds, car à cause de l’inertie au
moment de l’inversion, le portail parcoure encore un parcours en la
direction initiale du quel l’armoire n’est pas en condition de n’en tenir
compte.
Si après un inversion le portail ne retourne pas au point de départ,
il est possible établir un temps de antipatinage qu’il est adjoint au
temps calculé par l’armoire pour récupérer l’inertie.
m
ATTENTION: Si la fonction ASM est des-habilitée, la
manoeuvre de renversement continue jusqu’è quand le
portail n’est pas à butée. En cette phase l’armoire n’active
pas le ralentissement avant d’être arrivé à joindre la butée et
chaque obstacle rencontré après le renversement est consideré
fincourse.
1.0”
1.0”
0.5” - 1’00
Temp de anti-patinage
no
Fonction désactivée
SEnS
Activation du capteur d’obstacles
Ce menu permet le réglage de la sensibilité du capteur d’obstacles sur
10 niveaux
5
5
1 - 10
Plus haut est le valeur établit, plus rapide est l’intervention de
l’armoire en cas d’obstacle.
ATTENTION: n’import quelle sensibilité établit, le système
détecte l’obstacle seulement si le vantail est fermé; ne sont
pas détectés obstacles que freinent le vantail sans réussir à le
fermer
La détection est effectuée seulement si le vantail qui encontre
l’obstacle se bouge à vitesse normale. Les deux vantaux s’arrêtent et
bougent en direction contraire pour 3 seconds pour libérer l’obstacle.
Le commande après à Start reprend le mouvement en la direction
précédente (si le paramètre
StoP
=
invE
le mouvement reprend
dans la direction opposée).
S’il a déjà commencé le ralentissement l’obstacle ne viens pas détecté;
cette situation n’est pas dangereuse car dans le mouvement ralenti le
moteur pousse sur l’obstacle avec puissance très reduite.
no
Fonction désactivée
Содержание CITY1-EVO
Страница 2: ...OVERLOAD RM DOWN MENU UP MAINS J1 J2 J3 F1 FISSAGGIO FIXING FIXATION FIJACION...
Страница 123: ......