ESP
AÑOL
- 100 -
CONEXIÓN DE UN MOTOR CON CODIFICADOR Y
FINAL DE CARRERA
Instalación del codificador
• Conecte el negativo de la alimentación (cable NEGRO)
al borne
E5
• Conecte el positivo de la alimentación (cable ROJO)
al borne
Z5
• Conecte la salida del codificador (AZUL / BLANCO) entre los
bornes
E3
y
E4
C
Para activar la función, modificar las configuraciones del
parámetro
EnCo
Instalación del final de carrera
• Conecte el final de carrera de apertura entre los bornes
E1
y
E5
• Conecte el final de carrera de cierre entre los bornes
E2
y
E5
C
Para activar la función, modificar las configuraciones del
parámetro
FC.En
ENCODER
M1
12Vdc
E1 E2 E3 E4 E5 Z1 Z2 Z3 Z4 Z5 Z6
FCA1
FCC1
5.9 - LAMPARA DE SEÑALIZACION
CITY1-EVO prevé la utilización de una lámpara de señalización
a 230V - 40W (120V - 40W el modelo 120V) con intermitencia
interna.
Conectar los cables de la lámpara de señalización entre los
bornes
H1
y
H2
del cuadro.
230V - 40W
H1 H2 H3 H4 H5 H6 H7 H8
5.8 - CODIFICADOR
Con el cuadro CITY1-EVO es posible utilizar motores dotados de
codificador para el control exacto de la posición de las puertas.
Además los codificadores detectar si la cancela se para en una
posición anómala a causa de un obstáculo.
m
Para el funcionamiento de los codificadores es
indispensable que ambas puertas en posición de cierre se
apoyen en un seguro mecánico.
En cada encendido del cuadro de maniobras, el primer
mando de START hace que se cierre la cancela para volver a
alinear los codificadores (si está activo el cierre automático,
esta operación se produce automáticamente).
m
ATENCIÓN: Para conectar los codificadores se usan los
bornes de las entradas del final de carrera. Por lo tanto, no
es posible conectar al mismo tiempo 2 motores con final de
carrera y codificador.
m
ATENCIÓN: para pasar los cables de los codificadores
NO utilizar el conducto para cables por donde pasan los
cables de los motores
m
ATENCIÓN: los codificadores se deben conectar según
las indicaciones que se exponen a continuación.
Una conexión errónea del cable negro puede dañar el
dispositivo.
CONEXIÓN DE DOS MOTORES CON CODIFICADOR
• Conecte el negativo de la alimentación (cable NEGRO) de
ambos codificadores al borne
E5
• Conecte el positivo de la alimentación (cable ROJO) de ambos
codificadores al borne
Z5
• Conecte los cables de señal del codificador del motor 1
(AZUL / BLANCO) a los bornes
E3
y
E4
• Conecte los cables de señal del codificador del motor 2
(AZUL / BLANCO) a los bornes
E1
y
E2
C
Para activar la función, modificar las configuraciones del
parámetro
EnCo
ENCODER
M1
12Vdc
E1 E2 E3 E4 E5 Z1 Z2 Z3 Z4 Z5 Z6
ENCODER
M2
Содержание CITY1-EVO
Страница 2: ...OVERLOAD RM DOWN MENU UP MAINS J1 J2 J3 F1 FISSAGGIO FIXING FIXATION FIJACION...
Страница 123: ......