ESP
AÑOL
- 120 -
VISUALIZACIÓN
DESCRIPCIÓN
SOLUCIÓN
La pantalla muestra
Err2
Cuando es dado un mando de inicio la
puerta no se abre.
Significa que ha fallado el test del TRIAC.
1.
Verificar que los motores estén conectados
correctamente.
2.
Verificar que no haya intervenido la protección térmica
del motor.
3.
Si el motor M2 no está conectado, asegurarse que la
opción de menú
t.AP2
está configurada en
0.0”
.
4.
Si no son detectados problemas en los motores
contactar al servicio de asistencia técnica V2 para
enviar la central a reparación.
La pantalla muestra
Err3
Cuando es dado un mando de inicio la
puerta no se abre.
Significa que ha fallado el test de las
fotocélulas.
1.
Asegurarse de que ningún obstáculo haya
interrumpido el rayo de las fotocélulas en el momento
que se ha dado el comando de start.
2.
Asegurarse de que las fotocélulas que han sido
habilitadas a menú estén realmente instaladas.
3.
Si se utilizan fotocélulas de tipo 2, asegurarse de que
la voz de menú
Fot2
esté programada en
CF.Ch
.
4.
Asegurarse de que las fotocélulas estén alimentadas
y funcionantes: interrumpir el radio y verificar que
en pantalla el segmento de la fotocélula cambia de
posición.
5.
Compruebe que las fotocélulas estén conectadas
correctamente como se indica en el capítulo 5.5
La pantalla muestra
Err4
Cuando se da un comando de start
y la puerta no se abre (o se abre solo
parcialmente).
Significa que el final de carrera ha sido
liberado o que ambos finales de carrera
resultan estar activos.
Asegurarse de que los finales de carrera estén conectados
correctamente y que la puerta, abriendose, permita
l’apertura del final de carrera.
Si los finales de carrera no son utilizados configurar el
parámetro
FC.En
=
no
La pantalla muestra
Err5
Cuando es dado un mando de inicio la
puerta no se abre.
Significa que el test de las bandas de
seguridad ha fallecido.
1.
Asegurarse de que el menú relativo a la prueba de los
protectores (
Co.tE
) esté configurado correctamente.
2.
Asegurarse de que las bandas de seguridad que han
sido habilitadas a menu estén realmente instaladas.
3.
Controlar que las barreras están correctamente
conectadas como se indica en el capítulo 5.6
La pantalla muestra
Err8
Cuando se intenta usar la función de
autoaprendizaje y la orden es rechazado.
Significa que la programación del cuadro no
es compatible con la función requerida.
1.
Verificar que las entradas de Start están habilitadas
en modalidad estándar (menú
Strt
configurado en
StAn
)
2.
Verificar que la interfaz ADI esté deshabilitada (menú
i.Adi
configurado en
no
).
La pantalla muestra
Err9
Significa che la programación está
bloqueada con la llave de bloqueo de
programación CL1+ (cód. 161213).
Es necesario introducir la llave en el conector ADI
2.0 antes de proceder con la modificación de las
programaciones.
La pantalla muestra
Er10
Cuando es dado un mando de inicio la
puerta no se abre.
Significa que ha fallado el test de
funcionamiento de los módulos ADI.
1.
Verificar que el módulo ADI esté introducido
correctamente.
2.
Verificar que el módulo ADI no esté dañado y funcione
correctamente.
Содержание CITY1-EVO
Страница 2: ...OVERLOAD RM DOWN MENU UP MAINS J1 J2 J3 F1 FISSAGGIO FIXING FIXATION FIJACION...
Страница 123: ......