V-TUF RAPIDSXL110, Руководство оператора

Страница: 8 / 56

8
1.2.1 UK MARKET COMPLIANCE
The machine complies with current UK legislation.
By affixing the UKCA mark, you assume full responsibility for the product's compliance with the
requirements of the relevant legislation.
The UKCA mark is only used to demonstrate that the product complies with UK legislation.
The UKCA mark is only affixed to the product by the manufacturer or authorised representative
(where permitted by legislation); on the machine covered by this instruction manual it is affixed
directly by the Constructor, which ensures conformity.
By the act entitled The Product Safety and Metrology etc.. (Amendment etc.) (EU Exit) Regulations
2019 No. 696, which entered into force on 1 January 2021, a number of changes have been
introduced with a general impact on all product safety legislation. Including, of course, machine
regulation.
In particular, in Regulations 2019 Act No. 696 the Uk Declaration of Conformity is defined, the
Ukca mark is inserted in place of the CE mark, as is the replacement of the Low Voltage Directive
by The Electrical Equipment (Safety) Regulations 2016 No. 1101. In addition, all references to EU
legislation have been removed and the definitions amended to make them specific to the move-
ment of products in the UK. This manual is translated into English for export to the UK.
As of 1 January 2021, the rules for importation into the UK by economic operators are the same,
except for the drafting of the UK Declaration of Conformity and the drafting of the manual and
technical file in English.
1.3 COMPLIANCE WITH LEGISLATION
In addition to the rules of this Manual, the specific legal provisions in the field of accident preven-
tion at work must be observed.
1.4 DECLARATION OF ABSENCE OF HARMFUL SUBSTANCES
We hereby declare that our products, including hot-melt adhesive used during processing the
machine, are produced with materials that comply with the limits established by the regulations in
force on the protection of health and the environment and do not contain substances classified as
SVHC (Substance of Very High Concern) in accordance with EC 1907/2006 regulation (REACH, i.e.
Registration, Evaluation, Authorisation and Restriction of Chemical substances).
Although the above mentioned substances are not employed in processing cycles of raw materials
and our products, their presence cannot however be ruled out in the order of ppm (parts per
million), due to the micro-pollution of the raw materials.
1.5 PURPOSE OF THE DOCUMENT
The purpose of this manual is to provide the user with the indications and information to be
followed scrupulously for the correct use of the machine and for the protection and safety of the
operator called upon to interact with it.
For this reason, the User is invited to:
- make this document available in the workplace and explain it to all operators,
- passing on the manual to subsequent owners of the machine.