V-TUF RAPIDSXL110, Руководство оператора

Страница: 15 / 56

15
2.2 CONSTRUCTION TECHNOLOGY
The products are always up-to-date, both in design and technology, to make the use of high
pressure washers safer, simpler and more reliable, both from the user's point of view and from the
technical assistance point of view.
ATTENTION
During operation, no-one other than the operators in charge must stand near the
machine or, worse still, intervene on it.
The protections have been designed by the manufacturer in order to safeguard the
safety of the operators while carrying out their tasks. During operation, the guards
must not be removed for any reason.
Before intervening in the working area of the machine (for maintenance, adjustment
or replacement operations), the operator must wait a certain period necessary to
bring the heated elements back to a temperature close to the ambient temperature.
The operations must be carried out using protective gloves in order to avoid any risk
of injury (heater).
Use protective gloves in order to avoid any type of injury due to the hazardous
elements of the machine.
VTUF iDPS (Digital Protection System) means:
Delayed Auto stop (30 second delay stop motor with immediate start) – reduces wear on motor and pump.
The machine will shut down after 1 hour is not used – safety and reduced fire risk.
Low Water Cut-Out - reducing expensive damage from water shortage.
The machine will stop if the motor overheats.
Water leak detection shut off - reducing unnecessary wear and expense.
Safety pressure valve : visible and direct on the pump (following all European regulations).
Double lance holder on both sides of the cover.
Low Fuel Cut Out - to prevent damage to the fuel system.