V-TUF RAPIDSXL110, Руководство оператора

Страница: 44 / 56

44
CHAPTER 15 - DISPOSAL
If you decide to scrap the machine, to prevent it from posing an hazard to people and the environment, it
is necessary:
• disconnect the machine from the mains power supply and from the water supply network
• cut the power supply cable and piping
• remove the wand and gun
• cutting electrical wiring
• Disassemble and disconnect the pump and engine from each other
• destroy the identification plate of the machine and that of the pump and engine unit.
• Sheaths, flexible conduits and components made of plastic or non-metallic material must be
dismantled and disposed of separately.
• Electrical components such as switches, power supplies, cards, etc., must be dismantled for
reuse if they are still in good condition or, if possible, overhauled and recycled.
• The structure, and in any case all the metal parts of the machine, must be dismantled and
grouped by type of material. The various parts thus obtained can then be dismantled and
melted down to allow the recycling of the original machine material.
All fluids used in the machine's piping must be removed and disposed of in accordance with current
regulations. The machine must be dismantled by specialised personnel. The components of the pressure
washer must be disassembled and separated according to the nature of the materials that compose it,
and must be disposed of in compliance with the laws in force regarding the collection and separate
disposal of waste.
15.1 PRESSURE WASHER DISPOSAL (DEMOLITION OF THE MACHINE)
If the machine is dismantled, comply with the anti-pollution regulations in force in the
country of use.
Failure to comply with these provisions can cause considerable damage to people, animals
and the environment.
The End-customer is responsible for any failures and non-compliance with these rules.
With regard to the disposal of parts subject to increased wear, which may have been replaced, no
particular recommendations are necessary other than to follow the regulations in force at the place of
operation of the machine regarding the separate collection of waste.
Waste oil must be disposed of through the waste oil consortium, in accordance with the law.
15.2 DISPOSAL OF CONSUMABLES OR MATERIALS SUBJECT TO WEAR AND TEAR
Packaging materials and maintenance waste should be collected separately and sent to specialised
waste disposal companies (wood, plastic, metal, etc.) and not left within reach of children or animals.
15.3 . DISPOSAL OF PACKAGING
If you decide to keep the machine idle for a long period of time, it is advisable to carry out some operations
to keep the machine in good condition.
It is necessary to:
• End a work cycle.
• Switch off the machine and remove the connections to the water supply and the connection to the power
socket (if any)
• Empty the hydraulic circuits and the diesel tank.
• Store the machine in a place protected from the elements
• cover with a cloth to protect against dust.
Carry out these operations with care so that the equipment is in optimum condition when the work is
resumed
CHAPTER 16 - TEMPORARY DECOMMISSIONING OF THE PRESSURE WASHER