V-TUF RAPIDSXL110, Руководство оператора

Страница: 24 / 56

24
CHAPTER 8 - COMMISSIONING THE MACHINE
8.1 PREVENTIVE CHECKS AFTER RECEIPT
Upon receipt of the goods, check the condition of the package; if any damage is found, refrain from any
installation procedure and notify the carrier and supplier immediately.
Ascertain the good condition of the package, proceed to unpack the goods and check that the delivery
is complete (check correspondence with the delivery note); ensure that the general condition of the
machine is good and that there are no breaks or dents.
In the event of shortages or damage, notify the dealer and/or manufacturer immediately after making
any legal reservations with the carrier or companies authorised for this purpose; it is strictly forbidden
to dispose of the material in the environment.
8.2 CHECKING THE MACHINE STATUS
Following the document check, in order to detect any damage caused by transport, it is advisable to carry
out a thorough check of the condition of the machine.
If the packaging is damaged, take the following action:
EXTERNALLY RECOGNISABLE DAMAGE OR MISSING INDIVIDUAL ITEMS: these must be declared
immediately after delivery to the courier or carrier, etc., and confirmed in writing in the
consignment note;
DAMAGE THAT IS NOT IMMEDIATELY RECOGNISABLE: this must be declared to the carrier, or
transporter, etc., within the time limits permitted by law.
SERIOUS DAMAGE: an expert's report by a technical expert appointed by the carrier, the courier
or the respective insurance company is required.
ATTENTION
It is forbidden to tow the machine by the power supply cable and/or by the high-pres-
sure water outlet rubber hose.
ATTENTION
Complaints about missing equipment must be made within the time limits set out in the
purchase contract.
If the machine has to be moved manually from one place to another, you must discon-
nect the plug from the power socket, then, using the special handle and taking care not
to make any sudden movements that may compromise your safety, that of others and
the integrity of the machine itself, proceed to move it.
NOTE
The machine is normally sent with non-returnable packaging. Packaging materials
should be collected and disposed of separately and sent to specialised waste disposal
companies (wood, plastic, metal, etc.) and not left within reach of children or animals.