V-TUF RAPIDSXL110, Руководство оператора

Страница: 40 / 56

40
14.4.2 ELECTRODE DISTANCE CONTROL
Place the control rod on the head of the diesel nozzle, as shown in figure 2, and check that the two
electrodes are in contact with the surfaces of the rod.
14.4.3 CHECKING THE DISTANCE BETWEEN THE ELECTRODES AND THE CENTRE OF THE
DIESEL NOZZLE HEAD
Place the control rod on the head of the diesel nozzle, keeping its inner surface flush with the centre of
the nozzle, as shown in figure 3, and check that the two electrodes are in contact with the outer surface
of the rod.
ATTENTION
The operations described in this chapter must be carried out ONLY by qualified and autho-
rised personnel.
The use of protective equipment is MANDATORY during the operations described in this
section.
OPERATION CARRIED OUT ONLY BY SERVICE CENTER
OPERATION CARRIED OUT ONLY BY SERVICE CENTER