V-TUF RAPIDSXL110, Руководство оператора

Страница: 35 / 56

35
13.1.3 USE WITH CHEMICAL PRODUCT
With the machine switched on, without operating the gun, turn the black adjustable head anti-clockwise
to draw in the detergent.
The machine dispenses detergent at high pressure, and can be adjusted by means of the blue detergent
knob (D-HP) on the front of the machine
Figure 4.7
When you have finished dispensing the detergent, screw the adjustable head back on clockwise and
close the DHP detergent knob to work with high pressure water and rinse.
When doing so, carefully follow the information on the product labels, both with regard to safety and
with regard to the percentages to be observed when diluting.
Fill the detergent container(5) with the product you intend to use for the application to be carried out
and immerse the detergent suction tube with its filter in it.
DETERGENT
Repeat steps (1) (2) and (3) already carried out for cold water use.
During work, the detergent will be sucked in and automatically mixed with water.
• Practical advice
Avoid wetting the surface to be treated with the detergent with water, as this will leave a film of water
in the way of the product, which will result in poor cleaning results; instead, wait for the chemical to
come out of the nozzle while keeping the nozzle pointed towards the ground.
When the detergent reaches the outlet, approach the surface to be treated and, starting from the
bottom and in overlapping bands approaching the top, sprinkle the entire surface with the detergent.
This system avoids detergent spills on dry surfaces that could leave residues even after rinsing.
In order to avoid deposits or scaling, it is advisable to have the pump suck clean water for a few
seconds after work is completed.
D-HP