30
Versacount II+ User’s Guide
Foot Switch Option
61673621.fm
Using the Software Option
When the serial cable to the PC is installed and the software is enabled in the counter’s operator
interface, a data message can be sent to the integration PC when a reel count is complete by
pressing the 5 key on the number pad.
Foot Switch Option
An optional footswitch can be provided with the Versacount II+ as an alternative to using the key-
pad to stop and start the counter.
The footswitch is connected in the jack labelled “FOOT SWITCH” on the back panel of the coun-
ter. It does not need to be enabled in the operator interface. The counter will automatically
detect the footswitch signal once it is plugged into the footswitch jack.
When the footswitch is installed, it can be used instead of or in conjunction with the STOPGO key
on the keypad while counting a reel. Each time the footswitch is pressed, it will start or pause the
counter when counting a reel.
Using E-Stop in Malfunction/Fail Situations
There is one Emergency Stop button located on the right side of the
Versacount II+.
When the emergency stop is activated, all operations cease. If a
tape jam or some other malfunction occurs, follow the steps below to
resolve the failure.
1.
Press the red E-Stop button on the right side of the Ver-
sacount II+ to power off.
2.
Disconnect the power supply.
3.
Resolve the problem.
4.
Reconnect the power supply.
5.
Twist the E-Stop/Power button to turn the Versacount II+ back on.
6.
Resume operation.
Содержание Versacount II+
