V-TEK Versacount II+, Руководство пользователя

Страница: 15 / 76

Chapter 1: Setup and Operation 5
61673621.fm Preparing the Work Area
Preparing the Work Area
The Versacount II+ is a table-top machine which needs to be placed on a flat, stable surface in a
well lit area that is a minimum of 6’ high x 7’ wide x 4‘deep (2m x 2.2m x 1.3m). When positioning
the Versacount II+, choose an area that is not located below overhead gantries, walkways or
power lines to ensure objects or liquids cannot be dropped on the machine from overhead.
Choose a table that is at least 36” wide by 18” deep to provide sufficient space for the assembled
machine when it is fully loaded with a variety of tape reel sizes.
Ideally the table height should be adjustable so the machine height can be easily adjusted to suit
operators of varying heights. The objective is to position the Versacount II+ controls so they are
easily accessible for operation and maintenance. The suggested level is 36” (900 mm) above the
floor, but this may vary from one operator to another.
The table’s working surface should have a slope of no more than 5 degrees and be capable of
supporting a load of 30 pounds (14 kg).
Minimum
Height
6 feet
Minimum
Table Width
36 inches
Suggested
36 inches
Minimum Depth
18 inches
TABLE
Minimum Width 7 feet
Height