Chapter 1: Setup and Operation
11
61673621.fm
Initial Setup
Initial Setup
Main Menu
When the Versacount II+ is powered up, the LCD
screen displays the Main Menu shown in the fig-
ure at right.
The Main Menu screen offers two choices which
can be selected by pressing the appropriate arrow
key. The Setup Menu will display the settings that
will be used to count a reel. The Options Menu
allows the operator to set the counter’s clock and
enable hardware options.
If the operator is ready to begin counting a reel,
the option to select is SETUP. The program will
automatically detect whether the SMD counting
head or the axial/radial counting head is installed
and adjust itself accordingly. Refer to the instruc-
tions in sections 2-4 below for the configuration
that applies.
Options Screen
After the Versacount II+ is powered-up for its first
use, the counter’s clock should be checked and
reset if necessary. If a label printer or PC software
interface is installed and ready, it will need to be
enabled in the hardware screen. Follow the direc-
tions below to perform these setup tasks.
When OPTIONS is selected from the Main Menu,
the screen shown in Figure 1-11 will appear. This
screen offers two options that can be selected.
The two options shown are selected using the
arrow keys on the keypad. Pressing the ESC key
will return to the Main Menu.
Versacount II+ Rev #35
<- SETUP OPTIONS ->
Figure 1-10
OPTIONS (ESC=Back)
<- CLOCK HARDWARE ->
Figure 1-11
Содержание Versacount II+
