UTT Technologies Chapter 6 Wireless
http://www.uttglobal.com
Page 85
match in a similar fashion. However, the two devices can have different Default Tx
Keys as long as the keys are in the same order. For example, the Wireless Router
can use WEP Key 1 as its Default Tx Key, while the remote wireless device can use
WEP Key 3 as its Default Tx Key. The two devices will communicate as long as the
Wireless
Router’s WEP Key 1 is identical to the remote wireless device’s WEP Key 1,
and the Wireless
Router’s WEP Key 3 is identical to the remote wireless device’s
WEP Key 3.
2. You must configure at least one WEP key. Otherwise, the system will pop up a prompt
dialog box after you click the
Save
button, see Figure 6-5.
Figure 6-5 Key Settings Prompt Dialog Box
Figure 6-6 Security Settings - TKIP Mode
Security Mode:
It specifies the security mode to be used by the Wireless Router.
Here please select
TKIP
.
Pre-shared Key:
This key serves as seed for generating encryption keys. It must be
identical to the remote wireless network device
’s. It must be between 8 and 63
characters long.
Figure 6-7 Security Settings - AES Mode
Security Mode:
It specifies the security mode to be used by the Wireless Router.
Here please select
AES
.
