UTT HiPER 518W Скачать руководство пользователя страница 132

Страница: 132 / 295

UTT Technologies Chapter 7 Advanced

http://www.uttglobal.com

Page 124

feature on the Device, the LAN users can access the Internet through the Device without

changing any network parameters, no matter what IP address, subnet mask, default

gateway and DNS server they might have. Obviously, this feature can greatly facilitate the

users. As this feature is suitable for hotel network, we also call it hotel special version.

7.5.2 Enable Plug and Play

Figure 7-17 Enable Plug and Play

Enable Plug and Play:

It allows you to enable or disable plug and play. By default it

is disabled. If you select the check box to enable this feature, no matter what IP

address, subnet mask, default gateway and DNS server the LAN users might have,

they are able to access the Internet through the Device.

Save:

Click it to save your settings.

Note

1. The LAN hosts basic TCP/IP parameters (including IP address, subnet mask,

gateway IP address, and DNS server IP address) should be set properly; otherwise,

plug and play feature cannot act on those hosts.

Once plug and play is enabled, the Device will automatically enable proxy ARP,

enable DNS proxy, and disable IP spoofing defense.

Once plug and play is enabled, the Device will allow those non-IP/MAC binding users

to access the Device and Internet.

4. The users with the same IP address cannot access the Internet at the same time. For

example, if a LAN user with IP address 1.1.1.1 has connected to the Device to access

the Internet, another user with IP address 1.1.1.1 cannot access the Internet through

the Device.

5. A LAN user

’s IP address cannot be the same with the Device’s LAN/WAN interface IP

address, gateway IP address, and primary/secondary DNS server IP address;

otherwise, the user cannot access the Device and Internet.

Содержание HiPER 518W








































































































































































































































































































Результаты поиска

Содержание HiPER 518W

Отзывы:

Похожие инструкции для HiPER 518W

Бренды по названию

Популярные бренды

UTT HiPER 518W, Руководство по продвинутой настройке

Результаты поиска

Содержание HiPER 518W

Отзывы:

Похожие инструкции для HiPER 518W

Бренды по названию

Популярные бренды