UTT Technologies Chapter 7 Advanced
http://www.uttglobal.com
Page 126
SNMP manager automatically. The Device supports SNMP v1/v2c and Management
Information Base II (MIBII) groups.
The SNMP manager can read and change the information about the Device .
Figure 7-19 SNMP Settings
Enable SNMP:
It allows you to enable or disable the SNMP agent. If you want to
enable the SNMP agent on the Device, please select this check box.
SNMP Trap Host:
The IP address of host that receives SNMP Trap information.
SNMP Read Community Name:
The SNMP read community name is used as a
shared secret for SNMP managers to access the SNMP agent and to read the
configuration on the device but can
’t change the configuration on the device.
SNMP Write Community Name:
The SNMP write community name is used as a
shared secret for SNMP managers to access the SNMP agent and to read and
change the configuration on the device.
SNMP Trap community Name:
The device will send SNMP trap information to
SNMP manager in the name of
SNMP Trap community Name,
so network
administrator can figure out where the device locates.
Save:
Click it to save the SNMP settings.
Note
If you want to use SNMP Manager to manage the Device via Internet, please select
the
SNMP
check box in the
System > Remote Management
page first.
