UTT Technologies Chapter 8 User
Management
http://www.uttglobal.com
Page 140
8.3.2 PPPoE Server Global Settings
Figure 8-13 PPPoE Server Global Settings
Enable PPPoE Server:
It allows you to enable or disable PPPoE server. If you want
to enable PPPoE server on the Router, please select this check box.
Mandatory PPPoE Authentication:
It allows you to enable or disable
Mandatory
PPPoE Authentication
, that is, only the PPPoE dial-in users can access the Internet
through the Device. If you want to only allow the PPPoE dial-in users to access the
Internet through the Device, please select this option. The one exception is that you
select an address group from
Exception
Group
drop-down list.
Execption Group:
It specifies an address group that is exempt from the restriction of
Mandatory PPPoE Authentication
. If you select an address group here, the LAN
users that belong to this address group are exempt from the restriction of
Mandatory
PPPoE Authentication
, that is, whether it is enabled or not, those users may access
the Internet through the Device even they aren
’t PPPoE dial-in users. The address
group is configured in the
User Management > User Group
page.
Start IP Address:
It specifies the starting IP address that is assigned by the PPPoE
server.
Primary DNS Server:
It specifies the IP address of the primary DNS server that is
available to a PPPoE client.
Secondary DNS Server:
It specifies the IP address of the secondary DNS server
that is available to a PPPoE client.
Allow Users to Change Password:
Select the check box to allow users to change
