18
Cut Line
Center of
Hinge
Center of Hinge
Cut Line
PULL TO OPEN - Actuator Hinge Mounting Tube Installation Dimensions
Gate opening in degrees
Ranger HD
Dimension A
Ranger HD
Dimension B
Ranger Pro80
Dimension A
Ranger Pro80
Dimension B
90 degree opening
6”
13”
5”
7½”
100 degree opening
7½”
12”
7”
7”
105 degree opening
9”
10½”
8”
5½”
120 degree opening
11”
8”
6a
Dim A
Dim A
Dim B
Dim B
* Dimensions shown are
for 90° - 95° opening.
Install Actuator Mounting Tube - PULL TO OPEN (PRO80 or HD)
Cut Actuator Mount Tube to proper length. Weld to support bracket.
(
See table below for desired dimensions.)
The actuator mounting tube will need to be cut so that the ⅜” hole location matches the dimensions
for a pull to open system.
IMPORTANT: Verify the actuator type (PRO80 or HD) paying attention to the dimensions in the
chart below.
