DS1068-020B
46
LBT20769
9.1.3
Control panel battery test
Proceed as follows to check the condition of the control panel battery:
1.
Access the
MASTER / INSTALLER
menu by entering the access code. Press
to confirm;
2.
Select "
System Settings
" by pressing the key associated with the
or
symbol.
Press
to confirm;
3.
Select "
Test
" by pressing the key associated with the
or
symbol.
Press
to confirm;
4.
Select "
Battery
" by pressing the key associated with the
or
symbol.
Press
to confirm;
After the control panel has performed the test, messages concerning the status of the battery will be shown on the display of the
keypad.
In case of
failed test
one of the following text messages "Low or fault battery", "Low Battery", will be reported.
If the
test is successful
, the message "Battery OK" will be displayed;
5.
Press
repeatedly to go back to the upper level menu.
9.1.4
Call test or SMS
Proceed as follows to check the sending of calls or SMS:
1.
Access the
MASTER / INSTALLER
menu by entering the access code. Press
to confirm;
2.
Select "
System Settings
" by pressing the key
or
symbol.
Press
to confirm;
3.
Select "
Test
" by pressing the key associated with the
or
symbol.
Press
to confirm;
4.
Select "
Call or SMS
" by pressing the key associated with the
or
symbol.
Press
to confirm;
5.
Select the number to test by pressing the key associated with the symbol
or
symbol. Press
to confirm;
6.
The message
“
Are you sure?
” appears on the keypad display. Press
to confirm;
7.
The display of the keypad will show the number that is receiving the test call, the network used and the sending type.
For example, if the test is performed using the GSM module and the vocal sending, the following will appear on the display:
3401234567
GSM
Vocal
8.
Press
repeatedly to go back to the upper level menu.
9.1.5
Push notification sending test
Proceed as follows to check the PUSH notification sending:
1.
Access the
MASTER / INSTALLER
menu by entering the access code. Press
to confirm;
2.
Select "
System Settings
" by pressing the key associated with the
or
symbol.
Press
to confirm;
3.
Select "
Test
" by pressing the key associated with the
or
symbol.
Press
to confirm;
4.
Select "
PUSH notification sending
" by pressing the key associated with the
or
symbol.
Press
to confirm;
5.
Verify the reception of the notification on 1068set or Urmet Secure APPs;
6.
Press
repeatedly to go back to the upper level menu.
