DS1068-020B
40
LBT20769
7.2.4
Changing the sending mode
The notification sending mode can be:
1.
Vocal
. To use this mode the directory element should be configured as phone number;
2.
SMS
. To use this mode the directory element should be configured as phone number;
3.
IDP
. To use this mode the directory element should be configured as phone number;
4.
IDP backup
. An element with this programming is only used if the sending to the previous element programmed as IDP fails. To
use this mode the directory element should be configured as phone number;
5.
IDP/IP
. To use this mode the directory element should be configured as IP address and port;
6.
IDP/IDP backup
. An element with this programming is only used if the sending to the previous element programmed as IDP/IP
fails. To use this mode the directory element should be configured as IP address and port.
Proceed as follows to edit the sending mode:
1. Access the
MASTER / INSTALLER
menu by entering the access code. Press
to confirm;
2. Select "
System Settings
" by pressing the key associated with the
or
symbol.
Press
to confirm;
3. Select "
Communicator
" by pressing the key associated with the
or
symbol.
Press
to confirm;
4. Select "
Numbers - IP addresses
" by pressing the key associated with the
or
symbol.
Press
to confirm;
5. Select the number/IP address you want to change and confirm with
;
6. Select "
Sending type
" by pressing the key associated with the
or
symbol.
Press
to confirm;
7. Select the desired sending type by pressing the key associated with the
or
symbol.
8. Press the key associated with the "SENDING TYPE" message on the display. Press
to confirm;
Sending selected =
; Sending NOT selected =
9. Press
repeatedly to go back to the upper level menu.
7.2.5
Network modification
The networks that can be used are as follows:
1.
PSTN network
. It requires the 1068/014 module and is compatible with vocal call, IDP call and IDP backup sending modes
(available only with 1068/005 control panel);
2.
GSM network
. It requires the 1068/458 module and is compatible with vocal call, SMS, IDP call and IDP backup sending modes;
3.
IP network
. It requires the 1068/013 module and is compatible with IDP/IP call and IDP/IP backup sending modes.
4.
GPRS network
. It requires the 1068/458 module and is compatible with IDP/IP call and IDP/IP backup sending modes.
Proceed as follows to modify the network:
1. Access the
MASTER / INSTALLER
menu by entering the access code. Press
to confirm;
2. Select "
System Settings
" by pressing the key associated with the
o
. Press
to confirm;
3. Select "
Communicator
" by pressing the key associated with the
or
symbol.
Press
to confirm;
4. Select "
Numbers - IP addresses
" by pressing the key associated with the
or
symbol.
Press
to confirm;
5. Select the number/IP address you want to change and confirm with
;
6. Select "
Network type
" by pressing the key associated with the
or
symbol. Press
to confirm;
7. Select the desired sending type by pressing the key associated with the
or
symbol.
8. Press the key associated with the "NETWORK TYPE" message on the display. Press
to confirm;
Network selected =
- ; Network NOT selected =
9. Press
repeatedly to go back to the upper level menu.
