manualshive.com logo in svg

Uponor Smatrix Move PRO, Инструкция по установке и эксплуатации

Поделиться
Скачать
Uponor Smatrix Move PRO Скачать руководство пользователя страница 45

7.9  Alarms

This menu shows the current active alarms and the 
alarm history. A possibility of acknowleding all alarms 
and reseting the alarm histroy is also available.

Active alarms are always indicated with a ! and an 
number (of alarms) in the upper right corner of the 
display. Acknowledge the active alarms to remove the 
alarm indicator.

Menu tree

Alarms

Active alarms

Alarm history

Acknowledge all alarms

Reset alarm history

a

Ctive

 

alarms

This menu shows a list of all active alarms in the 
controller. Each active alarm is presented with a short 
description about when it was logged, why it occured, 
and if it has been acknowledged (indicated with a !). 
Detailed information is available via button press.

The detailed information shows alarm type, time and 
date when it was logged, the source of the alarm with 
severity (PR1 to PR5, where PR5 is the worst), and 
which alarm group it belongs to (1 to 10). The alarm can 
alse be acknowledged in the detailed information.

To access detailed alarm information:

1.  Select an alarm.

2.  Press the navigation wheel to confirm selection.

a

larm

 

History

This menu shows a list of the 10 latest alarms in the 
controller. Each active alarm is presented with a short 
description about when it was logged and why it 
occured. Detailed information is available via button 
press.

The detailed information shows alarm type, time and 
date when it was logged, the source of the alarm with 
severity (PR1 to PR5, where PR5 is the worst), and 
which alarm group it belongs to (1 to 10).

To access detailed alarm information:

1.  Select an alarm.

2.  Press the navigation wheel to confirm selection.

a

CknoWledge

 

all

 

alarms

This menu enables to acknowledge all active alarms.

To acknowledge all active alarms:

1. Select 

Acknowledge all alarms

.

2.  Press the navigation wheel to confirm selection.

3. Select 

Yes

.

 

Setting range:  No (default)/Yes

4.  Press the navigation wheel to confirm selection.

r

eset

 

alarm

 

History

This menu enables to reset the alarm history.

To reset the alarms history:

1. Select 

Reset alarm history

.

2.  Press the navigation wheel to confirm selection.

3. Select 

Yes

.

 

Setting range:  No (default)/Yes

4.  Press the navigation wheel to confirm selection.

EN

CZ

DE

DK

EE

ES

FI

FR

HR

HU

IT

LT

LV

NL

NO

PL

PT

RO

RU

SE

SK

4 5

U P O N O R   S M AT R I X   M O V E   P R O   ·   I N S TA L L AT I O N   A N D   O P E R AT I O N   M A N UA L

Содержание Smatrix Move PRO































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды