Connect room sensor to controller
The illustration below shows room sensors connected to
the controller.
1
3
2
4
2
#
4
6
11
X-159
S-155
1
A
B
S-155
C
aution
!
Do not change the jumper setting,
otherwise the function of the sensor will be
compromised.
Default setting:
To connect a room sensor to the controller:
1. Study the wiring diagram to locate the connection
terminal positions.
2. Ensure that the power is disconnected from the
controller.
3. Remove the terminal cover.
See section 5.6 Terminal cover for more information.
4. Route the wires through points A or B.
5. Connect the wires from the room sensor to the
controller.
• ZONE 1: Terminals 2 and 2 .
• ZONE 2: Terminals 4 and 4 .
• ZONE 3: Terminals 6 and 6 .
• ZONE 4: Terminals 11 and 11 .
6. Tighten the screws fixing the wires to the connector.
EN
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
2 0
U P O N O R S M AT R I X M O V E P R O · I N S TA L L AT I O N A N D O P E R AT I O N M A N UA L
