Uponor Smatrix Move PRO Скачать руководство пользователя страница 102

Страница: 102 / 126

Display settings

This menu enables display settings, such as contrast,
and it also shows the version number of the display
software.

To set the display contrast:

1. Select

Display settings

2. Press the navigation wheel to confirm selection.

3. Select

Display contrast

4. Press the navigation wheel to confirm selection.

5. Set the display contrast.

Setting range: -50 – 100 %, 1 % increments

6. Press the navigation wheel to confirm selection.

Restore factory settings

This menu enables all parameter settings in the
controller to be reset to the factory default settings.

To restore the factory settings:

1. Select

Restore factory settings

2. Press the navigation wheel to confirm selection.

3. Select

Yes

Setting range: No (default)/Yes

4. Press the navigation wheel to confirm selection.

5. All parameters in the controller are being restored to

factory settings.

Restore backup

This menu enables the controller to restore all parameter
settings from a previously created backup located on
the microSD-card.

To restore from a backup:

1. Make sure the microSD-card with the backup is

inserted into the controller.

2. Select

Restore backup

3. Press the navigation wheel to confirm selection.

4. Select

Yes

Setting range: No (default)/Yes

5. Press the navigation wheel to confirm selection.

6. All parameters in the controller are being restored

from backup.

New backup

This menu enables the controller to save a backup of all
parameter settings to the microSD-card.

To save from a backup:

1. Make sure a microSD-card, where the backup is to

be saved, into the controller.

2. Select

New backup

3. Press the navigation wheel to confirm selection.

4. Select

Yes

Setting range: No (default)/Yes

5. Press the navigation wheel to confirm selection.

6. All parameters in the controller are being saved to

the microSD card.

Restart wizard

This menu enables the controller to restart the setup
wizard.

To restart the setup wizard:

1. Select

Restart wizard

2. Press the navigation wheel to confirm selection.

3. Select

Yes

Setting range: No (default)/Yes

4. Press the navigation wheel to confirm selection.

5. The setup wizard is now being restarted.

1 0 2

U P O N O R S M AT R I X M O V E P R O · I N S TA L L AT I O N A N D O P E R AT I O N M A N UA L

Содержание Smatrix Move PRO































































































































Результаты поиска

Содержание Smatrix Move PRO

Отзывы:

Бренды по названию

Популярные бренды

Uponor Smatrix Move PRO, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Smatrix Move PRO

Отзывы:

Бренды по названию

Популярные бренды