Universal Laser Systems ULS-25PS, Руководство по эксплуатации

Страница: 7 / 100

Exposure Warning Label
Location: To the right of the beam window inside the
system where the laser beam enters the work area. On the
laser mounting bracket before the first mirror and next to the
aperture where the beam exits the laser tube.
Warning Label for Non-interlocked Panels
Location: 25 Watt - On the inside and outside of the first mirror cover (visible when the
fan cover is removed). 50 Watt - On the inside and outside of the laser cover and inside
the laser cover on the laser backplate where the laser tube attaches to the system.
1.3 The Safety Interlock System
The laser cutting and engraving system incorporates a safety interlock circuit that
automatically shuts off the power supplied to the laser whenever the front or top door is
opened. This interlock system is connected in series with a switch and a red indicator
light on the control panel of the system. The switch allows the power to the laser to be
manually turned on and off. The red indicator light will light up when power is being
supplied to the laser. If at any time the red indicator light remains
ON when the front or
top door is open, IMMEDIATELY unplug the system and call Universal Laser Systems
Inc. for service instructions.
The laser system comes equipped with a safety interlock defeat tool. Do not use this
tool unless you have been properly trained by Universal Laser Systems Inc. This tool is
only to be used for maintenance and repair procedures and should only be used when
instructed to do so by Universal Laser Systems Inc. and all safety precautions have
been followed.
WARNING:
Do not attempt to modify or defeat the safety interlock system for any
reason as this could result in exposure to hazardous laser radiation.
When using the interlock defeat tool, wear appropriate laser safety
goggles. Failure to wear appropriate goggles can result in severe eye
damage.
7