
3. Do nothing to the Rotary Fixture inside of the laser. The setup on it is the same as
in Landscape mode. Experiment with using both the Landscape and Portrait modes
and note the results.
NOTE:
Remember that the new page size that was established by the driver when the
objects diameter was entered in indicates the circumference or distance around the
outside of the object. Be sure to go back and adjust the graphics programs page size to
match these new dimensions
EXACTLY
otherwise the graphic will engrave in the wrong
place, engrave only partially, or not engrave at all.
4.6
The Optional Rubber Stamp Feature
There are two switches in the ULS Printer Driver which manage the rubber stamp
option, the “RUBBER
STAMP” switch and the “INVERT
FILL” switch. The “RUBBER
STAMP” selection taper profiles the engraving and automatically mirrors the entire page
about it’s centerline. The “INVERT FILL” switch will turn the entire page into a negative
while it is printing. This image inversion causes the laser system to engrave out the
background and leave the characters standing up. The “INVERT FILL” selection is only
used when engraving a full sheet of stamps because it creates the negative image for
the entire sheet, not just an individual stamp. Selecting both features allows the user to
create a full sheet of rubber stamps as a positive and unmirrored image on screen.
Since there are several different methods in creating and producing rubber stamps, we
will give just a few examples to follow so that the process becomes fully
understandable. Experiment with the different techniques and choose the method most
desired.
To create the artwork and engrave only one or a few stamps, set the page size in the
graphics program to something smaller than the full field. Just as an example, we will
use a page size that is 8.5 x 11 inches (215.9 x 292.1 mm) in the Landscape mode. In
this way we can output to a paper printer, before engraving, for proofreading. Make
sure that this page size is set up the same in the ULS Printer Driver. Draw a black box
slightly larger than the size of the stamp desired. Type in or add graphics within that
area and color them with a fill of white. It is not necessary to mirror the image. Then
draw a red outline box (.001inch or .1 mm line thickness) for the cut. An example is
shown below.
Rubber Stamp Example
59
Содержание ULS-25PS
