manualshive.com logo in svg

Universal Laser Systems ULS-25PS, Руководство по эксплуатации

Поделиться
Скачать
Universal Laser Systems ULS-25PS Скачать руководство пользователя страница 31

5.  Make sure that you set all of your line widths to .001 inches(.1 mm) otherwise the 

laser system may go into raster mode instead of the desired vector mode. 

 

 

6.  After every file download,  an “End of File” marker must be inserted at the laser 

system so that the buffer control will work properly. 

 

 

7.  Power setting for plotter pens can only be done at the laser system itself through the 

main control panel display.  Section 4.2 of this manual will explain how to set the 
Power,  Speed,  and PPI settings for plotter pens.  It will also describe how to insert 
an “End of File” marker and why it is necessary after every file download.  Please 
refer to that section for more explicit details.  If having trouble with using DOS based 
programs,  please contact our technical support. 

 

 

 
 

3.4 

The ULS Printer Driver for Macintosh 

 
The ULS Printer Driver for Macintosh consists of three parts:  the Printer Driver,  the 
Engrave Monitor,  and the Page Setup.  Many features of this driver function the same 
as they do for the Windows based Printer Driver. 
 
 

The Printer Driver 

 

 

The ULS Printer Driver for Macintosh 

 
 
In the ULS Printer Driver for Macintosh there is only one switch,  the “Corel Bitmaps” 
switch,  that is not present in this driver because it is not necessary to have this switch 
for the Macintosh computer system.  Please refer to the section on “The ULS Windows 
Printer Driver” to understand the function and selection of the different settings the 
driver has to offer. 

 

31

Содержание ULS-25PS





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды