
4.4
Running a Sample
The following outline is a step by step procedure used to produce a laser engraved
object. Please follow this procedure to understand the steps necessary for laser
engraving.
Step 1
Turn on the computer and then the laser system. Be sure to turn the
equipment on in this order.
Step 2
Load the object that will be engraved into the laser system and position it in
the desired location in the engraving area. Usually, the object is placed up
against the rulers in the upper left hand corner of the engraving area. Use the
rulers to determine the size of the engraving object. Use either the top door
or the front door for loading.
Step 3
By using the motion system control keys, position the focus lens assembly
over the engraving material. Adjust focus by using the focusing tool and
adjusting the height of the engraving table or entering in the thickness in the
control panel.
Step 4
Create a graphic using the graphics software program and position the
graphic on screen so that it matches the placement of the object in the laser
system.
Step 5
Before printing, go to the ULS Printer Driver and assign the power settings.
If using DOS based programs, go to the laser system and enter in the power
settings on the control panel.
Step 6
Now send the job down to the laser system.
Step 7
Turn on the exhaust blower.
Step 8
Supervise the engraving or cutting function.
DO NOT
leave the job
unattended.
Step 9
Finally, when the job is in the laser system’s buffer, press the “START JOB”
button to start engraving.
4.5
Using the Optional Rotary Fixture
The Rotary Fixture controls in the ULS Printer Driver are used along with the optional
Rotary Fixture to engrave onto round or cylindrical objects. In order to compensate for
different diameter objects, the image must be adjusted. This is done automatically by
the ULS Printer Driver when selecting Rotary Fixture and entering in the diameter of the
object being engraved.
54
Содержание ULS-25PS
