Unipulse TM500, Руководство по эксплуатации

Страница: 97 / 165

5 COMMUNICATIONS
88
Chapter
5
C
O
MMUNICATIONS
②
Reading Y-axis Start Point after Work No. is written normally
- Set value write command (First Setting)
Example: Writing 1:±20mA to Input Selection, Y-axis Setting, First Setting
1
（
STX
）
Delimiter N G
R 2 0 1 Delimiter 0
Host
TM500’s return
(In normal processing)
(Transmission to the TM500)
Item No. (See the list of set value commands.)
Y-axis Start Point in the example
Item group (See the list of set value commands.)
Display Range Setting in the example
（ STX ） Delimiter 1 0 R 2 0 1 0 + 0 0 0 0 0
TM500’s return
(In abnormal condition)
Header (If there is no header, no data will result.)
NG No.
1: Receipt of a statement different from the command format
Data of the specified set value
Command received by the TM500
Header (If there is no header, no data will result.)
Host
TM500’s return
(In normal processing)
Command received by the TM500
Header (If there is no header, no data will result.)
(Transmission to the TM500)
Item No. (See the list of set value commands.)
Input Selection in the example
Item group (See the list of set value commands.)
Y-axis Setting in the example
（ STX ） Delimiter 0 0 W 1 0 0 0 + 0 0 0 1 0
0 0 + 0 0 0 0 0 0 1 W 0 1 Delimiter
Data to write
“1” in the example
（
STX
）
Delimiter N 1 G
TM500’s return
(In abnormal condition)
Header (If there is no header, no data will result.)
NG No.
1: Receipt of a statement different from the command format
2: Attempt to write a set value outside the setting range
4: Attempt to write a set value through communications
during measurement
5: Attempt to write while protecting