Unipulse TM500, Руководство по эксплуатации

Страница: 96 / 165

5 COMMUNICATIONS
87
Chapter
5
COMMU
N
ICATIONS
- Set value read command (First Setting)
Example: Reading Input Selection, Y-axis Setting, First Setting
- Set value read command (Work Setting)
Example: Reading Y-axis Start Point, Display Range Setting, Work No. 10, Work Setting
①
Writing “10” to Work No.
R 1 0 0 Delimiter 0
Host
(Transmission to the TM500)
Item No. (See the list of set value commands.)
Input Selection in the example
Item group (See the list of set value commands.)
Y-axis Setting in the example
（ STX ） Delimiter N 1 G
TM500’s return
(In normal processing)
TM500’s return
(In abnormal condition)
Data of the specified set value
Command received by the TM500
Header (If there is no header, no data will result.)
Header (If there is no header, no data will result.)
（
STX
）
Delimiter 0 0 R 1 0 0 0 + 0 0 0 1 0
NG No.
1: Receipt of a statement different from the command format
Host
(Transmission to the TM500)
Item No. (See the list of set value commands.)
Work No. in the example
Item group (See the list of set value commands.)
Work Setting in the example
0 0 + 0 0 0 0 0 1 0 W 1 0 Delimiter
Data to write
The amount of data varies depending on the set value.
TM500’s return
(In normal processing)
Command received by the TM500
Header (If there is no header, no data will result.)
（ STX ） Delimiter 0 0 W 0 0 1 0 + 0 0 0 0 1
（ STX ） Delimiter N 1 G
TM500’s return
(In abnormal condition)
Header (If there is no header, no data will result.)
NG No.
1: Receipt of a statement different from the command format
2: Attempt to write a set value outside the setting range
4: Attempt to write a set value through communications
during measurement
5: Attempt to write while protecting