iColor
LF700
Manual Version 3.6
Uninet
Copyright 2014
Page 66
Greasing the mandrel thread
As part of the routine maintenance of the machine, greasing the mandrels threaded shafts is very important
and will keep the mandrels in working order.
Remove the shaft by supporting the mandrel and turning
the knob in an anti clockwise rotation.
Remove the mandrel knob and
washer from the end of the mandrel.
Add grease to the threaded shaft of
the mandrel knob, and return
back to the mandrel.
The greasing of the mandrel should be carried out periodically
dependant on use.
Changing the fuse
Before changing the fuse, make sure that the cutter is completely disconnected from
its power source.
For continued protection against risk of fire, replace only with the same type and
rating of fuse: T4AL 250V.
1. To remove the fuse lightly pry the fuse holder release clip in the direction opposite the
power switch. The fuse holder will pop free.
2. Remove the fuse holder.
3. Pull the fuse from the holder.
4. Put new fuse in the holder and clip the holder back
into place.
!
WARNING
!
WARNING
Release
tabs
T4AL 250V
Содержание iColor LF700
Страница 1: ...i C o l o r L F 7 0 0 ...