Uninet iColor LF700, Руководство пользователя

Страница: 60 / 82

iColor LF700 Manual Version 3.6
Uninet Copyright 2014
Page 60
Changing drag knife offset
A very important parameter for a drag knife is the offset. The offset is the distance between the knife
center and the knife tip.
Knife offset should be set each time the knife is changed and should be checked if the knife shows
signs of wear.
Typical knife offset for
LF700
knives is between 0.41 and 0.45 for standard knives.
Changing knife offset:
1. Power on the cutter, load media, and mount tool (see section 1).
2. Press ‘Velocity’ will appear on the LCD.
3. Use or to scroll through the menu until ‘knife offset’ is reached, press Current offset will
appear on the LCD.
4. Press or to change the knife offset.
The value will change
1. Press to perform the internal knife offset test.
2. Press to confirm the chosen knife offset.
3. Press to leave the offset unchanged.
When the knife offset is set correctly, the test pattern looks like this:
When the knife offset is too low, the test pattern looks like this:
When the knife offset is too high, the test pattern looks like this: