iColor
LF700
Manual Version 3.6
Uninet
Copyright 2014
Page 42
!
WARNING
Knife installation
The Summa Cut cutters use razor-sharp knives. To avoid serious injury, use caution
when installing, removing or otherwise handling the knife!
For safety reasons, the knife depth has been set to zero. Simply turn out the knife (see fig 1-22 yellow arrow
clockwise) to start cutting. Below is the complete description of the knife removal and knife installation.
Removing the drag knife
1.
Loosen the head clamp screw (1),
remove the knife holder from the clamp (2).
2.
Turn the knurled adjustment knob (3)
clockwise to push the knife (4) out of the holder (5).
3.
Carefully pull the knife from the holder.
Installing the drag knife
1.
Remove the aluminum plunger from the plastic knife holder (5) by turning the knurled adjustment
knob (3) counterclockwise until the plunger comes out of the holder.
2.
Insert the conical, non-cutting end of the knife into the opening
in the narrow end of the holder; gently push the knife all the way in.
3.
Turn the holder upside down and tap it lightly on a solid surface to
ensure that the knife is completely inserted.
4.
Slowly turn the knurled knob clockwise until the tip of the
blade extends the distance required for the desired cutting
media as shown in diagram to the right.
5.
Insert the knife holder into the head clamp and push it all
the way down.
6.
Tighten the clamp screw.
Содержание iColor LF700
Страница 1: ...i C o l o r L F 7 0 0 ...