Uninet iColor LF700 Скачать руководство пользователя

Страница: 67 / 82

iColor

LF700

Manual Version 3.6

Uninet

Page 67

The

iColor

LF700

cutter range has a number of sliding surfaces made of smooth metals and plastics. They

are virtually friction-free and require no lubrication. They will, however, collect dust and lint that may

affect the cutter’s performance. Keep the cutter as clean as possible by using a dust cover. When necessary,

clean the unit with a soft cloth dampened with isopropyl alcohol or mild detergent. Do not use abrasives.

Cleaning the drive system

Over time, the sleeves of the drive drum may become clogged with accumulated residue from the media

land ink or toner dust. This may cause the media to slip between the pinch rollers and the drive sleeves,

decreasing traction.

Cleaning the drive system:

KEEP FINGERS AND OTHER BODY PARTS AWAY FROM THE

CUTTING AREA. THERE ARE HAZARDOUS MOVING PARTS.

Make sure there is no media loaded in the cutter.

Switch cutter off and disconnect the cutter from the mains. Raise the pinch rollers.

Put a pinch roller above the sleeve that needs to be cleaned. Make sure it is the outer left or the outer

right pinch roller (otherwise there is not enough pressure).

Remove the backing from a piece of vinyl. Place the piece of vinyl between a pinch roller and drive

sleeve with the tacky side down. Lower pinch roller.

Turn on another yellow drive sleeve by hand so that the piece of vinyl is winding on the sleeve for at

least one turn.

Then pull the piece of vinyl from underneath the pinch roller.

Repeat several times until all residue is removed from the drive sleeve.

Cleaning the drive system

WARNING

Содержание iColor LF700














































































Результаты поиска

Содержание iColor LF700

Отзывы:

Похожие инструкции для iColor LF700

Бренды по названию

Популярные бренды

Uninet iColor LF700, Руководство пользователя

Результаты поиска

Содержание iColor LF700

Отзывы:

Похожие инструкции для iColor LF700

Бренды по названию

Популярные бренды