Unimog U500, Инструкция по монтажу

Страница: 202 / 292

Body and Implement Mounting Guidelines U500 North America Hydraulic system
August 2005 Page 205 of
294
6.2.1.7 Center basic hydraulic connections
H68 connections are located above the fuel tank, on the right-
hand side of the vehicle (seen in drive direction) behind the
cab. These two circuit 2 connections can be used for driving
continuous consumers. As in the front, the pressure line is a
female plug and the return line is a male socket. The positions
of these two center mounted connections can be seen in the
following drawing or in the vehicle drawings on the Unimog
Resource CD.
Dimensions without brackets are in [mm].
Dimensions in brackets are in [in].
Figure 6.7: Position of the H68 hydraulic connections
Figure 6.8: H68 hydraulic connections