Unimog U500, Инструкция по монтажу

Страница: 154 / 292

Body and Implement Mounting Guidelines U500 North America Implement / Body Installation
August 2005 Page 157 of
294
Figure 4.130: Front mounted crane
Figure 4.131: Center mounted crane
Figure 4.132: Rear mounted crane
Dimensioning of mounting frames for cranes
It is recommended the following materials or materials with a higher
yield stress be used for manufacturing the mounting frames
Tensile strength Yield stress
Material
10
6
Pa [N/mm
2
] 10
6
Pa [N/mm
2
]
E 460 TM > 560 > 560 460 460
E 500 TM > 610 > 610 500 500
Table 4.15: Material data
Equivalent materials:
SAE: 480 XLK or ASTM: A607 Grade 65
Possible outrigger principles
The following outrigger principles are possible on the Unimog. The
outriggers must always mount directly on the mounting frame or the
crane. Outrigger fastening on the Unimog frame is not permitted.