Unimog U500, Инструкция по монтажу

Страница: 13 / 292

Body and Implement Mounting Guidelines U500 North America General Information
Page 16 of
294
August 2005
Implement manufacturers and companies who mount bodies, imple-
ments and equipment to Unimog U500 should have the following
documents:
•
The current Unimog option list containing description of the Uni-
mog models and all optional equipment available
•
The Unimog technical data book with all technical data and im-
portant additional information
•
Body and Implement Mounting Guidelines including all informa-
tion on mounting implements and the Freightliner LLC require-
ments for implement mounting.
These documents form the basis for the development, modification
and review of
bodies, implements and equipment of all types,
which are temporarily or permanently mounted on and operated with
the Unimog. The development and review of implements or bodies
for the Unimog does not, in principle, entitle claims for costs or dam-
ages to be made against Freightliner LLC. This also applies with re-
gard to compliance with road traffic law and accident prevention as
specified in the national and international regulations on road traffic
and technical equipment.
Particular reference is made to the responsibility of the implement
manufacturer for his scope of delivery and to the rules of safety to
be complied with in respect of the vehicle/implement interface.
The instructions given must be observed exactly to maintain the op-
erating and road traffic safety of the chassis and to maintain war-
ranty rights.
Illustrations and drawings are examples only and serve to explain
the texts and tables.
References to regulations, standards, directives, etc. are partially
given in key words and serve only as information.
A CD-ROM called “Unimog Resource CD” is available with the fol-
lowing documents:
•
Body and Implement Mounting Guidelines
•
Unimog Chassis Drawings (two-dimensional data in .dwg
and .dxf format)
•
Technical Data Book
•
Unimog Option List
•
Unimog Weight Calculator and Axle Load Calculations
•
Center of Gravity Calculation
The Unimog Resource CD can be requested from the Unimog Im-
plement Manager.
Instructions regarding vehicle safety
We recommend the following:
Only use genuine Mercedes-Benz service parts and conversion
parts and accessories, which have been explicitly approved by
Freightliner for use with your vehicle model. Such parts have been
specially tested for safety, reliability and suitability.
Freightliner can give no guarantee with regard to reliability, safety
and suitability in the following cases:
•
If original parts or approved conversion parts or accesso-
ries have been exchanged for other parts or other changes
have been made to the vehicle.
•
If bodies are not manufactured or mounted according to
the valid Body and Implement Mounting Guidelines or if, in
the event of deviations, the approval of Freightliner is not
sought.
Official acceptance by public testing bodies or official approval
does not rule out safety hazards.
Please contact the Unimog Implement Manager listed at the be-
ginning of this guideline for further general technical data of the
Unimog, which is not contained in this Body and Implement
Mounting Guideline.
Confidential. All rights reserved. Reproduction or translation
in whole or in part is not permitted without written authoriza-
tion from the publisher.