Sprite Installation and Operator’s Manual
REV D1
Page 28 of 36
LCD Alert Messages Displayed During Initialization
The following LCD alert messages may be displayed during initialization:
LCD
Messages
Description
Corrective Action
(ALERT CLEAR)
Missing or defective floppy disk
1
.
Alternating message.
Power off the Unit, install a backup
diskette, then attempt to power on.
If problems persist, call for service.
Unit could not locate the required font files
on the floppy disk
1
.
Power off the Unit, install a backup
diskette, then attempt to power on.
If problems persist, call for service.
Setup File not found, using
Default file ....
Application setup (INI) file could not be
found on the floppy disk
2
.
Scrolling message . . . . .
Press
ONLINE/ENTER
push-button and
the Unit will attempt to reload Default
settings into a new setup file (APP.INI) and
finish booting to the Online state.
Press Enter key continue
Second Scrolling message . . . . .
After loading defaults, the Unit may have
different communication parameters than
what had previously been set. Other user
specified settings, such as print margins,
contrast, etc., may have changed as well.
If the Unit fails to operate Online with the
host or has other problems after loading
default settings, call for assistance.
Default file not found ....
Application setup (INI) and the default
(DFL) file could not be found on the floppy
disk
2
.
Scrolling message . . . . .
Power off the Unit, install a backup
diskette, then attempt to power on. If
problems persist, call for service.
Contact Service
Second Scrolling message . . . . .
1
Indicates that the two messages will be alternately displayed as long as the alert exits.
2
Indicates a scrolling message.
F l o p p y
F a i l e d
F l o p p y
M e d i a E r r
N o F o n t s
F o u n d
L o a d i n g
D e f a u l t s
