Prima IP KVM Switch User Guide R1.4
However, when using
single KVM Switch
configuration, if you want to select
port 7, you should first press its default bank number
01
and then the port
number
07
:
Scr
Lk
Scr
Lk
0
1
0
7
Select PC
=
- -
95
Since the single KVM Switch bank number is default to 01 (i.e. itself a master KVM Switch
on its own), therefore you should always specified its bank number by “01”.
OSD
To switch to a specific PC using the OSD Menu, you have to activate the OSD
Menu first, Hit
ScrLk + ScrLk + Space Bar
to activate the OSD Menu. Then use
the cursor keys to navigate to the channel you want and then hit Enter key to
select the PC channel.
In a daisy-chained configuration, you may want to select specific channel on a
specific bank (when you have daisy-chained multiple KVM switch units), just use
the Page up/Page Down key for bank selection and navigate the OSD Menu by
cursors key to the channel you want and hit Enter to make it your active channel.
<Next lower channel>
Front Panel Button
Press the corresponding button.
bank
number
(01)
port
number
(07)
Scr
Lk
Scr
Lk
↑
Hotkeys
Next lower channel
=
