Prima IP KVM Switch User Guide R1.4
Prima IP configuration – Single server mode
3.1 Make sure (at least the PS/2) computers that are to be connected to the KVM switch are
powered off. If not, power them off before you proceed with the following steps.
If you use only one single Prima IP KVM switch in non-cascaded application, you should
ignore step 3.2, 3.3, and 3.4 and jump directly to step 4.
If you want to daisy-chain multiple Prima KVM Switches to the [master] Prima IP KVM
switch, go to step 3.2. You can daisy-chain up to 8 levels of KVM Switches.
3.2 Use the daisy-chain cable (M-HDB15-HDB15-F) to connect the DaisyChain Port (HDB 15
female) of the [master] Prima IP KVM Switch to the DaisyChain IN Port (HDB 15 male) of
the second Prima KVM switch. Then connect the power adapter cord to the second Prima
KVM switch to power it on.
3.3 If you have yet another switch to be daisy-chained, just repeat Step 3.1 to connect them.
You can daisy-chain up to 8 units. Remember to plug a Terminator onto the Daisy-chain
Out Port of the last Prima KVM switch unit.
Combo-free USB PS/2 KVM Cable
3.4 (Now your Prima IP KVM switch, and those Prima KVM Switches daisy-chained below should
have been powered-up and initialized….) Connect each computer to a PC port on the
backpanel of the KVM switch(es). You should use the special [Combo-free] USB PS/2
KVM cable (with the USB-to-PS/2 adapter) for connection to a USB computer (PS/2
computer). (Other types of cables may be used accordingly.)
- -
13
