Prima IP KVM Switch User Guide R1.4
To enable the LDAP Authentication …….
Enable Remote Authentication : Just select
LDAP
as the Remote Authentication method, and then
configure subsequent settings:
SSL Access : Check this option if you want to enable SSL access of the LDAP authentication.
However, to use this option, you should make sure your LDAP server support SSL and also you
have to install a distinct set of certificates – ldapcert.crt and ldapkey.pem – onto the Prima IP by
uploading them through the Security page (for details, please refer to
Section
4.15, Security –
Certificates Installation, Viewer Encryption and Password Policies
).
Server : Enter here the IP address of the LDAP server.
Port : Enter here the port number used in LDAP authentication. By default, it is set to port 389.
Second Server (if any) : If there is a second LDAP server for authentication, you can enter its IP
address here.
User Base Search DN : Here you should enter the
User Base Search DN
, which is typical to the
LDAP server you use for authentication. By default, the User Base Search DN is:
cn=users,dc=mycompany,dc=us
However, you should enter your own appropriate one. If you don’t know, you should contact
your LDAP server administrator.
To enable the RADIUS Au hentication……
t
- -
75
