Prima IP KVM Switch User Guide R1.4
Local Console – Configure Local Console Authentication and
mouse acceleration
After any setting change, click the
Submit
button to save new setting to the Prima IP database, and then
click
Apply Setting
to apply new settings to Prima IP immediately.
On this page, you can enable/disable the local console authentication by password, and also
specify the mouse acceleration parameters.
Authentication
Local User Needs Authentication : Here you can enable/disable the password authentication on
the Local Console. To enable the password authentication on the Prima IP local console, you
have to check this option. And to disable it, just uncheck.
When you have done with the modification, always remember to hit the
Apply Setting
button.
Mouse Acceleration
Acceleration Rate : This option will allows you to select the mouse acceleration factor for the
local console. Mouse acceleration factor range is from 1 x to 20 x for your selection.
Acceleration threshold : This option will allow you to select the mouse acceleration threshold in
pixels. The mouse acceleration threshold is a value (in pixels), only when the cursor moves
beyond which, will the local console mouse acceleration factor be effected.
Note that in order for the mouse resynchronization to work fine on the viewer, the mouse acceleration
on each of the connected servers or computers has to be turned off. A zero acceleration mouse on a remote
server will not reflect on the viewer since the mouse cursor on the remote server should catch up with the
mouse on the viewer side, which could use any acceleration factor. However, on the local console of Prima
IP KVM Switch, you will experience zero mouse acceleration and the low efficiency when trying to move
- -
78
