User’s Manual MSO/UPO2000 Seri es
96 / 137
Instruments.uni-trend.com
Set CAN-FD protocol trigger source, which can be CH1, CH2, CH3, CH4 or D0-D15. The current selected
source display on the right corner of the screen. The source supports display and select digital channel
only when the digital channel is opened in LA.
Note
: Only the channel that has been connected to the signal, select it as the trigger source that can
get the stable trigger and correct decoding.
(3)
Signal Type
Set the input signal of the current source is high data line signal or low data line signal, which can select
CAN_H or CAN_L.
(4)
Bit Rate(bps)
Set the bit rate of CAN-FD bus serial data, which can select 10k, 20k, 25k, 31.25k, 33.3k, 37k, 50k, 62.5k,
68.266k, 83.3k, 92.238k, 100k, 125k, 153k, 250k, 400k, 500k, 800k, 1M or user-defined. User can input
customized bit rate when “user-defined” is selected.
(5)
FD Bit Rate
Set FD bit rate of CAN-FD bus serial data, which can select 250k, 500k, 800k, 1M, 1.5M, 2M, 4M, 6M, 8M
and user-defined. User can input customized bit rate when “user-defined” is selected.
14.6 LIN Decoding
(1)
Bus Decoding
Refer to
(2)
Information Source
Set trigger source of LIN protocol, which can be CH1
、
CH2
、
CH3
、
CH4 or D0-D15. The current
selected source display on the right corner of the screen. The source supports display and digital
channel only when the digital channel is opened in LA.
Note
: Only the channel that has been connected to the signal, select it as the trigger source that can
get the stable trigger and correct decoding.
(3)
Polarity
Set the polarity of the input signal, which can be normal (high=1), inverse(high=0).
(4)
Version
Set the version to v1.x, v2.x or random.
(5)
Bit Rate (bps)
Set the bit rate of LIN, which can be 1.2k, 2.4k, 4.8k, 9.6k, 10.417k, 19.2k or user-defined. User can input
customized bit rate when “user-defined” is selected.
(6)
ID Parity Bit
